Kushwaha Waterproofing Services blue promotional banner with roof waterproofing worker

All Types of Waterproofing Work

Protect Your Property. Keep Water Out.

Professional waterproofing solutions for homes, commercial buildings and industrial properties across Chandigarh, Mohali and Panchkula.

Explore All Services →

Roof surface preparation before waterproofing treatment

Roof & Terrace Solutions

Strong Preparation. Better Protection.

Surface preparation, crack and joint treatment, suitable membranes and protective coatings selected for site conditions.

View Roof Services →

Professional Workmanship

Your Home for a Better Tomorrow.

From PU coating and injection grouting to Brick Bat Coba, APP membrane, seepage repair and epoxy flooring.

Discuss Your Project →

We Undertake All Types of Waterproofing Work

Residential • Commercial • Industrial | Roofs, terraces, bathrooms, walls, basements, tanks and more.

See All Services →

What we do

Waterproofing services

Every building and leakage problem is different. Explore our services below; the final treatment should be selected after considering the source of water, surface condition, exposure and project requirements.

Roof & Terrace Waterproofing

Roof and terrace surfaces are exposed to rain, standing water, heat and changing weather. Our approach starts with checking the surface, drainage, cracks, joints and any existing coating. Depending on the condition, the work may include cleaning, repairing weak areas, preparing the surface, treating corners and applying a suitable waterproofing system. Proper preparation and drainage detailing are important parts of a dependable roof treatment.

PU Waterproofing Coating

Polyurethane (PU) coating can create a continuous protective layer on suitable prepared surfaces. The system is selected according to the substrate, exposure, movement and product instructions. Work may include surface cleaning, repairing defects, primer application, detailing around joints and outlets, and applying the coating at the specified coverage and thickness. The final performance depends on correct preparation, curing and maintenance.

PU Injection Grouting

PU injection grouting is used for selected active leakage paths in concrete, cracks and construction joints. After assessing where water is entering, suitable injection points are planned and the material is injected using appropriate equipment. Some PU grouts react with moisture and expand to help seal the water path. The right material and method depend on the crack, water pressure and structural condition.

Bathroom & Toilet Waterproofing

Leakage from bathrooms and toilets may be linked to floor waterproofing, pipe penetrations, wall-floor junctions, tile joints or plumbing defects. The affected area should be assessed before selecting a repair. Depending on the issue, treatment may involve joint sealing, plumbing coordination, removal of damaged finishes or renewing a waterproofing layer before tiles are reinstated. Addressing the source is essential before repairing stains below.

Wall Dampness & Seepage

Damp patches, peeling paint, salt deposits and bubbling plaster can have different causes, including external rain penetration, plumbing leaks, roof junctions or rising moisture. We help assess the visible symptoms and likely water-entry points before discussing a suitable treatment. Depending on the source, work may involve external waterproofing, crack sealing, joint treatment or repair of affected plaster after the moisture source has been addressed.

Crack Repair & Joint Sealing

Cracks and joints can allow water to enter a building, particularly where surfaces meet or movement occurs. The repair method depends on the crack width, depth, movement and whether water is actively passing through it. Treatment may include opening and cleaning the defect, using a compatible repair compound, sealant or injection system, and protecting the repaired area. Structural cracks should be assessed by a qualified professional.

Brick Bat Coba Waterproofing

Brick Bat Coba is a traditional terrace treatment that uses brick pieces and cement mortar to form a sloped protective layer when suitable for the structure. The work requires attention to the existing slab, levels, rainwater outlets, junctions and curing. A correctly planned slope helps water drain instead of remaining on the roof. The appropriate waterproofing details should be selected according to site conditions and the intended roof finish.

APP Bitumen Membrane

APP modified bitumen membrane systems are used on suitable roofs and other specified surfaces to provide a waterproofing layer. Reliable installation depends on preparing and priming the substrate, setting out the sheets, forming correct overlaps, and detailing outlets, corners, upstands and penetrations. The membrane type and installation method should match the project specification and safety requirements, especially when torch application is used.

Basement & Foundation Waterproofing

Below-ground walls and foundations can be exposed to soil moisture, groundwater and water pressure. A suitable system may use a specified membrane, protective layer and carefully detailed joints, corners and service penetrations. Surface preparation and protection against damage during backfilling are important. The system should be selected for the site conditions and designed drainage requirements; no single membrane is appropriate for every foundation.

Ceiling Leakage & Plaster Repair

Ceiling stains, damp plaster and flaking paint are often symptoms of water entering from a roof, bathroom, pipe or upper floor. The water source should be identified and corrected before damaged plaster and paint are restored. Depending on the condition, the process may include moisture assessment, removal of loose material, allowing the area to dry, repairing the surface and applying suitable finishing materials.

Protective & Bituminous Roof Coating

Protective roof coatings can help shield compatible surfaces from weather exposure and moisture. The surface must be sound and clean, with cracks, joints and drainage details treated as required by the selected system. The coating is applied according to the manufacturer’s coverage and curing guidance. Coating selection depends on the roof material, existing layers, sunlight exposure and the type of protection required.

Self-Adhesive Membrane Waterproofing

Self-adhesive membranes are used on suitable prepared surfaces where a membrane layer is specified. Installation involves checking the substrate, applying primer when required, aligning the rolls, pressing the membrane firmly and carefully sealing overlaps, corners and penetrations. The surface and temperature conditions must be suitable for adhesion. A compatible protection layer may be needed to prevent damage after installation.

Water Tank Waterproofing

Water tanks require a treatment compatible with the tank material and its intended use. The inspection should consider cracks, construction joints, pipe entries and the condition of the existing lining. The selected system must be suitable for contact with stored water where applicable and must be allowed to cure as instructed before the tank is returned to service. The exact method depends on whether the tank is concrete, masonry or another material.

Epoxy Flooring & Floor Coating

Epoxy floor systems can provide a smooth, hard-wearing finish on suitable concrete floors in homes, commercial areas and industrial spaces. Preparation is critical and may include removing weak material, cleaning, grinding and repairing surface defects. The system is selected according to traffic, moisture and intended use, then mixed and applied within its working time. Curing and site access should follow the product instructions.

Tile Joint Cutting & PU Sealant Filling

Tile joints and movement joints may need careful cleaning and resealing when the existing seal has failed or water is entering through the connection. Depending on the joint, old material may be removed, edges prepared and a compatible PU sealant applied with the correct joint shape and depth. This service is different from replacing a failed waterproofing layer beneath tiles, so the source of leakage should be assessed first.

Industrial & Commercial Waterproofing

Commercial and industrial sites may require waterproofing for large roofs, service areas, foundations, plant rooms or concrete structures. The work begins with reviewing the area, access, surface condition, drainage, existing layers and operating requirements. Treatment options are then discussed around the project scope, compatible materials, application conditions and curing time. Work planning can be coordinated to help reduce unnecessary disruption to site operations.

Your property deserves the right treatment.

Kushwaha Waterproofing Services helps customers address roof leakage, terrace seepage, damp walls, bathroom leakage and other moisture-related concerns. Since the same symptom can have different causes, we believe in discussing the affected area, visible damage and site conditions before recommending a treatment. Our aim is to explain the proposed work clearly, use materials suitable for the application and pay attention to preparation, junctions and finishing details.

Roof & terrace areas

Wet-area leakage

Cracks & joints

Wall seepage

Why choose us

A clear process from inspection to treatment

A durable result depends on more than the coating itself. Surface preparation, crack and joint treatment, water drainage, application conditions and curing all matter. We discuss the visible problem and the proposed scope before work begins, so customers can understand the treatment options and the steps involved. Send photographs or videos of the affected area to start a project enquiry.

✓ Problem-focused assessment✓ Clear scope of work✓ Treatment suited to site conditions

How it works

Simple project process

Share the issue first; the treatment plan can then be based on the actual site conditions.

STEP 01

Tell us the problem

Tell us which area is affected, when the leakage appears and whether it happens during rain, after using a bathroom or continuously.

STEP 02

Share photos

Share clear photos or a short video of the leakage, nearby joints, roof surface or damaged finish to help explain the problem.

STEP 03

Assess the site

Discuss the likely water-entry points, substrate condition, existing treatment and the options that may be suitable for the site.

STEP 04

Confirm the scope

Confirm the scope of work, selected materials, preparation steps, access needs and expected schedule before the work begins.

Project videos

Watch our waterproofing work

Explore video clips supplied for the business website, featuring roof surface preparation, Brick Bat Coba, PU coating and epoxy flooring. These clips help visitors see examples of the work process.

Roof Surface Preparation

Surface cleaning and preparation before applying a waterproofing system.

Brick Bat Coba Work

Terrace brick-bat laying as part of a roof waterproofing treatment.

PU Waterproofing Coating

Application of a protective coating over a prepared roof surface.

Epoxy Flooring Work

Floor coating work in an indoor corridor, showing the application process.

Work gallery

Waterproofing project photos

Browse photos supplied for the website, showing examples of roof preparation, membrane installation, terrace finishes, joint treatment and protective coating. Each project needs its own inspection and treatment plan.